Rane SRM 66 Manuale Utente Scaricare il pdf (Pagina 3)

Manual-3

Rear Panel Description

 POWER input connector. Use only an RS 1, or other Remote AC power supply approved by Rane. is unit is supplied with a

remote power supply suitable for connection to this input jack. Consult the factory for a replacement or a substitute. is unit’s

power input is designed for an AC supply, delivering 18 volts, from a center-tapped transformer capable of supplying at least the

750 mA of current demanded by this product. Using any other type of supply may damage the unit and void the warranty.

 Chassis ground point. A #6-32 screw is supplied for chassis grounding purposes. Units with external power supplies such as this

SRM 66 supply do not ground the chassis to earth through the line cord. is chassis connection is critical and in most instal-

lations, required by law. Many chassis ground this point to an ampliﬁer chassis ground or directly to the grounding screw on a

grounded AC outlet cover by means of a wire secured on both ends with star washers to guarantee proper contact. See the Chassis

Grounding note on the next page.

 FP LOCK button. When pressed in, locks out all front panel control except for Group Levels and Memory Recall. e

SR 1L remotes (sold separately) are also able to control Group Levels with FP LOCK engaged. e user is able to view, but not

edit, all Edit pages.

 MEMORY RECALL PORT (MRP). is Port allows any remote switch to recall any of the system Memories. e ﬁrst eight

Memories recall with simple switch closure to a single pin. A “binary” wiring mode allows access to more complex Memory recall

functions. See Figure 8 on page Manual-8. Complete programmability of the MRP is possible using the Edit MRP Conﬁguration

feature found in SRM Exchange software. See DSC 1 & SRM Exchange software on page Manual-9.

 REMOTE INTERFACE PORT (RIP). is Port supports up to seven optional SR 1L “Smart” digital Remote controls (see page

Manual-6). Each Remote may be assigned to adjust the Level of any one of the six SRM 66 Output Groups or the Master Group.

 OUTPUT GAIN switches. ese assist setting the optimal gain structure of the Output stage, depending on what the following

device would like to see (or hear). Balanced signals usually require a +4 dBu setting (button out), and unbalanced signals usually

require the -10 dBV setting (button in).

 OUTPUTS. ese balanced Euroblock connectors may be wired balanced or unbalanced. See page Manual-1 or the RaneNote,

“Sound System Interconnection” later in this manual for assistance.

 INPUT GAIN switches. ese assist setting the optimal gain structure of the Input stage, depending on the level from the previ-

ous device. Balanced signals usually require a +4 dBu setting (button out), and unbalanced signals usually require the -10 dBV

setting (button in). Use the MIX INPUT HEADROOM meters as a guide for determining GAIN switch position (see  in the

Front Panel Description).

 INPUTS. ese line-level balanced Euroblock connectors may be wired balanced or unbalanced. Microphones require a pream-

pliﬁer (see the Rane MS 1B for a solution). See the next page and the RaneNote “Sound System Interconnection” elsewhere in this

manual for assistance with various wiring options.

-10dBV

+4dBu

GAIN GAIN GAIN GAIN GAIN GAIN

PORT (RIP)

REMOTE INTERF

ACE

MADE IN U.S.A.

MEMORY RECALL

PORT (MRP)

N108

RANE CORP.

+4dBu

-10dBV

7 8 A B +V -V

LOCK

COM 1 2 3 4 5 6

CLASS 2 EQUIPMENT

COMPLIES WITH PART 15 OF THE FCC RULES FOR A CLASS 'B' COMPUTING DEVICE

GAIN GAIN GAIN GAIN GAIN GAIN

COM 1 2 3 4 5 6 7 8

-VA B +V

SRM 66

INPUTS

4 352 1 6

OUTPUTS

4 356

750mA

POWER

1 2 3 4 5 6 7 8 9 10

Commenti su questo manuale

Nessun commento

Rane SRM 66 Manuale Utente Pagina 3

Commenti su questo manuale

Prodotti e manuali riguardandi Audio Rane SRM 66